Stuff For Sale or Trade
Re: Stuff For Sale or Trade
If you happen to dig out a hammer for an 1893, yu let me know.
-
- Beginner
- Posts: 46
- Joined: Tue Jun 23, 2009 6:53 pm
Re: Stuff For Sale or Trade
I could use a takedown screw for the sideplate that would work on a 91 92 97 maybe early 39. The one I have now is incorrect slotted one from a 39a I think...I am unsure but I do not think the early ones used the slotted head...Thanks
-
- Beginner
- Posts: 29
- Joined: Thu Jun 09, 2011 6:28 pm
Re: Stuff For Sale or Trade
Dave, I have an unmolested 336A waffletop but the original buttplate was broken when I got it. I have tried the replacement repro pads and they just aren't the same. Would you happen to have the one which has the molded in numbers 39445?
-
- Beginner
- Posts: 46
- Joined: Tue Jun 23, 2009 6:53 pm
Re: Stuff For Sale or Trade
Have any of you heard from this guy? I have not.
-
- Beginner
- Posts: 1
- Joined: Mon Feb 18, 2013 12:31 pm
Re: Stuff For Sale or Trade
WTB dust cover screw for Marlin 1881 38-55
Re: Stuff For Sale or Trade
Dave,
I'm looking for the carrier for a 1967 336 in .44. Any chance you have it or know where I can get it?
Thanks Jim
Roosterjd@gmail.com
I'm looking for the carrier for a 1967 336 in .44. Any chance you have it or know where I can get it?
Thanks Jim
Roosterjd@gmail.com
Re: Stuff For Sale or Trade
Hello everyone. I hope you can forgive a new member as I am unsure if this is the right place to post about this:
My grandfather recently passed away, he was a WW2 vet and an avid shooter. Along with some very fine rifles and pistols, I also acquired a few 1945 model 80's. The entire model number is: 80-DL-22 cal-S-L-LR. The rifle in question is in extremely good condition with only some slight scratches on the stock. It is an entire piece, there are no parts missing, and despite the fact that it hasn't been used in apx. 50 or so years, the oil still appears very new. I was hoping someone could give me an estimate on the price of this particular rifle. I understand that it is not by any means a collectible, but more of an antique. Thank you so much.
My grandfather recently passed away, he was a WW2 vet and an avid shooter. Along with some very fine rifles and pistols, I also acquired a few 1945 model 80's. The entire model number is: 80-DL-22 cal-S-L-LR. The rifle in question is in extremely good condition with only some slight scratches on the stock. It is an entire piece, there are no parts missing, and despite the fact that it hasn't been used in apx. 50 or so years, the oil still appears very new. I was hoping someone could give me an estimate on the price of this particular rifle. I understand that it is not by any means a collectible, but more of an antique. Thank you so much.
-
- Beginner
- Posts: 46
- Joined: Tue Jun 23, 2009 6:53 pm
Re: Stuff For Sale or Trade
You just as well used this guys thread. Obviously he is not going to
Re: Stuff For Sale or Trade
I have a "modern" 1895 [1973-74] with a 3 digit serial # ,less than fifty rounds through it. Anyone interested in this early and nearly mint 45-70 Marlin pm me. Thanks , NIck
Re: Stuff For Sale or Trade
Looking for a .32 caliber revolver ejection tube.
Any help?
Any help?
Re: Stuff For Sale or Trade
Please see WTB. Looking for 2 or 3 early[1972-3] Monte Carlo stocks. Good to New condition . I need these drastically and am willing to pay a FAIR price. Thanks for looking. Nick
-
- Beginner
- Posts: 2
- Joined: Wed Dec 17, 2014 11:15 am
Re: Stuff For Sale or Trade
Hi Dave :
I am looking for a friend , he has a Marlin Crown Prince with a broken firing pin , know where I could get one ??
Gary
I am looking for a friend , he has a Marlin Crown Prince with a broken firing pin , know where I could get one ??
Gary
-
- Beginner
- Posts: 4
- Joined: Mon Dec 22, 2014 12:16 pm
Re: Stuff For Sale or Trade
Would like to know more about your gun. Email me at vaughnpjones@verizon.net. Photos if you have, barrel length, checkering, etc.smokey04 wrote:I have a "modern" 1895 [1973-74] with a 3 digit serial # ,less than fifty rounds through it. Anyone interested in this early and nearly mint 45-70 Marlin pm me. Thanks , NIck
-
- Beginner
- Posts: 10
- Joined: Fri May 18, 2007 8:30 pm
Re: Stuff For Sale or Trade
I need a butt stock for a 1894 marlin with a Cresent butt plate wildbill9ball@yahoo.com
Re: Stuff For Sale or Trade
Anyone got an 1894 Octagonal beakdown rifle barrel in 25-20 or 32-30? Ijust got a '94 (low six digit number) that's fine except some nit-wit cut the barrel & mag tube down to 16 1/2" ! I'm not sure if the break-down is a modification to the barrel, a different barrel, or doesn't make any difference. This is my second Marlin, and my sister sold my dad's 38-55 when I was in the army back in the mid-seventies, so I don't know much about them beyond ther great handling. I'm not looking forward to fitting up a barrel from a blank.