Marlin Slide Action Parts for Sale
Posted: Tue Aug 30, 2022 4:50 pm
I have the following Marlin slide action parts for sale. They were removed from a Marlin Model 37 but some of the parts will work/interchange with other models. I can send pics on request, and all the parts have been cleaned and are in good condition. Some show minor wear, but look very usable to me. All included screws and slots are in great condition too.
The 24 inch round barrel comes with the magazine attaching lug, front and rear sight. It's chambered for .22 S, L, LR. The barrel and bore are in great shape. There is some bluing loss from the area where the slide handle works, but overall the bluing is in nice condition.
I'm not sure if the front stock for the round barrel will work on Marlin models that have an octagon barrel. It may be able to be modified slightly and work fine, but I don't have any experience with that. The handle slide is in nice condition and comes with the screws. There are no cracks or any damage to the front stock and handle that I can see.
I looked up some prices where I could find the parts being listed for sale and then reduced my prices considerably. I'll help with any shipping cost (I prefer shipping modes that provide a tracking number, and the mininum costs for a small letter sized USPS Priority envelope is about $8). Give me a holler if can use some of this stuff...call/text 86five80five74five9, I'm on EST, or message me on here.
Here's a list of what I have and the prices...thanks..!
Tang screw - $3
Carrier, .22 S, L, LR - $35
Cartridge cutoff w/screw -$20
Complete ejector assembly (base, arm and pin, spring, base screws - $35
Hammer and hammer screw (hammer sears look great) - $35
Complete cartridge guide assembly, with screw - $20
Main spring - $10
Trigger and trigger pin - $25
Breech bolt - with extractor and spring pin (to hold in the firing pin spring) - $60
Handle slide, screws, front stock - $75
24 inch barrel, with front sight, rear sight (w/harpoon elevator), and front magazine lug - $100
The 24 inch round barrel comes with the magazine attaching lug, front and rear sight. It's chambered for .22 S, L, LR. The barrel and bore are in great shape. There is some bluing loss from the area where the slide handle works, but overall the bluing is in nice condition.
I'm not sure if the front stock for the round barrel will work on Marlin models that have an octagon barrel. It may be able to be modified slightly and work fine, but I don't have any experience with that. The handle slide is in nice condition and comes with the screws. There are no cracks or any damage to the front stock and handle that I can see.
I looked up some prices where I could find the parts being listed for sale and then reduced my prices considerably. I'll help with any shipping cost (I prefer shipping modes that provide a tracking number, and the mininum costs for a small letter sized USPS Priority envelope is about $8). Give me a holler if can use some of this stuff...call/text 86five80five74five9, I'm on EST, or message me on here.
Here's a list of what I have and the prices...thanks..!
Tang screw - $3
Carrier, .22 S, L, LR - $35
Cartridge cutoff w/screw -$20
Complete ejector assembly (base, arm and pin, spring, base screws - $35
Hammer and hammer screw (hammer sears look great) - $35
Complete cartridge guide assembly, with screw - $20
Main spring - $10
Trigger and trigger pin - $25
Breech bolt - with extractor and spring pin (to hold in the firing pin spring) - $60
Handle slide, screws, front stock - $75
24 inch barrel, with front sight, rear sight (w/harpoon elevator), and front magazine lug - $100