Marlin 1889 Barrel Length

This is an area for guests to post questions

Moderators: Regnier (gunrunner), JohnK, Sure-Shot, Marlin

Forum rules
I have unlocked this forum but made it read only for non members -- Webmaster --
Post Reply
Timber49
Beginner
Posts: 1
Joined: Sat Apr 17, 2021 3:12 pm

Marlin 1889 Barrel Length

Post by Timber49 »

I have a model 1889, ser. # 63803 that I ordered a factory letter for. The letter shows it to have a 30" octagon barrel. My gun measures 28" to the bolt face. It shows no evidence of being cut. Anyone have any ideas?
Regnier (gunrunner)
Distinguished Expert
Posts: 4667
Joined: Sun Oct 27, 2002 2:33 am
Location: The Sunflower State

Re: Marlin 1889 Barrel Length

Post by Regnier (gunrunner) »

Timber 49;

There are known factory records errors. But, it also possible that either the has been cut or replaced. What are the patent dates stamped on the barrel? Is your rifle the correct caliber to the letter? Check the distance from the muzzle to the center of the front sight dovetail to make sure it is correct ( often, cut barrels the distance is wrong )
Things to look at.........
Due to the increasing cost of ammunition, there will be no warning shot!

The growing federal deficit = generational slavery to the national debt.

If the world was perfect.......it wouldn't be.
Post Reply