Model 60
Moderators: Regnier (gunrunner), JohnK, Sure-Shot
-
- Beginner
- Posts: 4
- Joined: Mon Oct 11, 2021 9:46 pm
Model 60
I have a 4/5 year old model 60 that was giving me ejection issues. I found that my recoil spring guide is bent. It also seems to be sold out everywhere. Any Chance someone would like to sell an extra they have sitting around? Or know someplace for me to look?
- marlinman93
- Distinguished Expert
- Posts: 2858
- Joined: Sun Nov 10, 2002 1:22 pm
- Location: Portland, Oregon
Re: Model 60
Have you checked Numrich Gun Parts?
Marlin lever actions 1870's-WWI, Ballards, and single shot rifles!
-
- Beginner
- Posts: 4
- Joined: Mon Oct 11, 2021 9:46 pm
Re: Model 60
Yes, they didn't have it.
-
- Beginner
- Posts: 4
- Joined: Mon Oct 11, 2021 9:46 pm
Re: Model 60
I have been looking around and all I can find are the guides on ebay.
I have been working on straightening the Bent guide today. I cleaned the heck out of it, then threw it into a 475° oven for a total of 25 minutes. I then ran it to the vice and pressed in with a straight edge. A ton better, it will only be temporary until I get a new one.
I have been working on straightening the Bent guide today. I cleaned the heck out of it, then threw it into a 475° oven for a total of 25 minutes. I then ran it to the vice and pressed in with a straight edge. A ton better, it will only be temporary until I get a new one.
-
- Beginner
- Posts: 4
- Joined: Mon Oct 11, 2021 9:46 pm
Re: Model 60
After a little fire, and a little elbow grease and cleaning, all done!
Got that guide arrow straight!
Got that guide arrow straight!